Adjustments 21
Adjustments
Temperature Controller Settings
(ETC00011)
1. PV = Processing value (red in color).
2. SV = Setting value (green in color).
3. Back ( ), forward ( ), down ( ), and up ( ) keys.
4. Programming key access door — Open to access programming keys.
5. AT key: the mode key to execute Auto Tuning function.
6. MD key: the mode key to change items to be set, such as set value, etc.
7. EV2: Event 2 output signal lamp.
8. EV1: Event 1 output signal lamp.
9. OUT: Main output light to indicate when heater bank is are on.
10. AT: Signal lamp flashes while unit is auto-tuning.
11. SV2: Not currently used.
