Eastey EC Series, User Manual, Page: 27 / 39

Maintenance 27
Maintenance
The Eastey EC Series Variable Speed Conveyor will provide many hours of
maintenance free operation. There are a few items that may require attention from time
to time.
Cleaning the Belt
Make sure the belt stays clean and grease free. If the belt requires a more thorough
cleaning, use a soft, lint-free cloth with a mild detergent and water and let dry.
Never
use harsh or abrasive cleaners or chemical agents when cleaning any part of the
machine.
Changing the Belt
Shut off power and disconnect electrical connections before beginning the belt changing
procedure. You may choose either side from which to remove and replace the conveyor
belt; attaching hardware on the opposite side will hold rollers and plates in position while
rail is removed from one side. Save all removed parts and attaching hardware, noting if
necessary were each is used. Re-use removed parts for reassembly; replacing any
excessively worn, broken, or missing parts with replacements that meet specifications of
original parts. Reassembly is the reverse of disassembly.
1. Remove the magnetically-mounted control box (1) and set it aside if it is on the
side from which you will be replacing the conveyor belt.
2. Remove attaching socket head cap screws and mounting plate (2). Set aside
mounting plate and retain attaching hardware for re-use.
1
4
5
2
3