Eastey EC Series, User Manual, Page: 20 / 39

20 Operation
Control Box
The conveyor control box is held in place by magnets and is repositionable. It can be
repositioned anywhere along the metal surface of the conveyor frame side rail where it
will be most convenient for operation.
Power On / Off Switch
The Power On / Off is a toggle switch to turn the power on or off. Power is
switched off when the switch is in the down position: power is on when the
switch is in the up position. Switch the power on by flipping the lever up;
switch the power off by flipping the lever down.
Power Indicator Light
Illuminates when power is On; is unlit when power is Off.
Speed Control Dial
Adjust conveyor speed using the Speed Control Dial to bring the conveyor to
the required speed. The level gradations from 0 to 100 represent percentage
from minimum (0) to maximum (100) available speed and are otherwise
arbitrary and likely will not correspond to any specific units of linear velocity.
To stop the conveyor, turn the Speed Control Dial to minimum setting (0), and toggle the
Power Switch to the Off position. The conveyor will slow down and stop.
DC Motor Speed Control
ON
FWD
BRK
OFF
REV
Allow
Motor
to Stop
before
Reversing
Power
Indicator
Light
Speed
Control
Dial
Power
On / Off
Switch