Eastey EC Series, User Manual, Page: 19 / 39

Operation 19
Operation
Power
With the toggle Power Switch set to the Off position and Speed Control Dial set to
minimum setting (0) Plug the power supply cord into a properly wired and grounded
outlet.
Toggle the Power Switch to the On position. The Power indicator light will illuminate.
CAUTION! When the power is turned on keep clear of the moving belt.
Gradually increase conveyor speed using the Speed Control Dial to adjust the conveyor
speed to required speed.
DC Motor Speed Control
ON
FWD
BRK
OFF
REV
Allow
Motor
to Stop
before
Reversing
Power
Indicator
Light
Speed
Control
Dial
Power
On / Off
Switch