Eastey EC Series, User Manual, Page: 10 / 39

10 Introduction
Specifications
Model
Nominal Conveyor Size
(width × length)
Width
(A)
Height
(B)
Length
(C)
EC1248
12 in. × 48 in.
30.5 × 122 cm
20.2 in.
51.3 cm
See Table Below
Based on Leg Length
48.9 in.
124.2 cm
EC1848
18 in. × 48 in.
45.7 × 122 cm
26.2 in.
66.5 cm
See Table Below
Based on Leg Length
48.9 in.
124.2 cm
EC2472
24 in. × 72 in.
61 × 183 cm
32.2 in.
81.8 cm
See Table Below
Based on Leg Length
72 in.
183 cm
Model
With 9” Leveling Legs With 17” Leveling
Legs
With 9” Leveling Legs
and Locking Casters
With 17” Leveling
Legs and Locking
Casters
All Models
20 in. - 33.5 in.
50.8 cm – 85.1 cm
28 in. - 41.5 in.
71.1 cm – 105.4 cm
24 in. - 37.5 in.
61 cm – 95.3 cm
32 in. - 45.5 in.
81.2 cm – 115.6 cm
Explanation of Model Numbers
• E = Manufactured by Eastey Enterprises Inc., division of Engage Technologies.
• C = Conveyor. EC Series variable speed conveyor offer a reliable stand-alone
product transport for primary or secondary product marking, and make a
convenient add-on infeed or exit conveyor to existing case taping or shrink
wrapping equipment.
• _ _ = 12, 18, or 24 — First two digits indicate the nominal width of the conveyor
belt in inches: 12, 18, or 24-inch conveyor lengths are available.
•
_ _ = 48 or 72 — Remaining two digits indicate the nominal total length of the
conveyor in inches: 48 or 72-inch conveyor lengths are available.
•
V0 = Voltage and Phase, 110V 5A single phase. All models are available
configured for 110V 5A single phase. Only single phase is offered.
Conveyor Specifications
Machinery Makeup
Industrial strength ¼ inch thick steel, powder
coated for durability.
Variable Speed Up to 100 fpm.
Conveyor Height Adjustment 20 in. to 33.5 in. with 9-in. leg and without casters;
23 in. to 41.5 in. with 17-in. leg and without casters;
24 in. to 37.5 in. with 9-in. leg and with casters;
27 in. to 45.5 in. with 17-in. leg and with casters.
Electrical Requirements
110~115V 5A Single Phase.