Troubleshooting 25
Troubleshooting
Problem
Solution
Taper will not start
•
Check power input.
•
Circuit breaker has been tripped.
- Check the amperage setting.
- Reset the circuit breaker by pressing in on the
Off/Reset button (O) and releasing it.
After resetting the circuit breaker, restart the
machine by pressing the On/Start button (I).
Machine is not operating
•
Machine has inadequate electrical power or
power is not connected. Verify system power
meets specification requirements.
Stuck carton
•
Check drive belt width adjustment.
•
Check for proper height adjustment.
Uneven or poor tape cuts
•
Adjust knife arm spring tension.
•
Adjust wipe roller spring tension.
•
Replace cutting knives.
Uneven Tape Leg on Front
•
Tape tension is incorrect. Increase tape tension.
Summary of Contents for BB-2 SS
