EasternCCTV HIK-504-32 User Manual Download Page 99

Page: 99 / 187

User Manual of Digital Video Recorder

Figure 7. 6

Export by Normal Video Search Using eSATA HDD

Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”.

Check backup result.

Choose the record file in Export interface and click button

to check it.

The Player player.exe will be exported automatically during record file export.

Figure 7. 7

Checkup of Export Result Using eSATA HDD

7.1.2

Backing up by Event Search

Purpose:

Back up event-related recording files using USB devices, such as USB flash drives, USB HDDs, and USB

writer.

Steps:

Enter Export interface.

Menu>Export>Event

Search for events.

Select

Motion

Alarm Input

Line Crossing Detection

Intrusion Detection

as the event type.

Summary of Contents for HIK-504-32




























































































































































































Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands

EasternCCTV HIK-504-32, User Manual

Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands