eastern WL-1000, Instuction Manual

Page: 13 / 16

1. Press STAND BY button.
㞏
# Light on BLUE power LAMP.
㞏
# Light on AUTO LED, LOW LED and LINK LED.
2. Operate DVD player or DVD receiver connecting WL-T1000.
L / ON INPUT L / OFF
MANUAL CH. AUTO
VOLUME
㞖 㞘
STAND BY
1. Connect DC 9V adapter to DC input jack on the back of WL-T1000
2. Switch on WL-T1000.
3. Plug in WL-R1000.
4. Switch on WL-R1000
㞏
#
Power Blue LAMP of WL-T1000 and WL-R1000 flicker, which means STAND-BY. (AUTO ID Pairing)
Back panel of Transmitter (WL-T1000) Right side of Receiver (WL-R1000)
I
O
p
v
aGvu
aGvmm
RQ###RII
SRZHU
RQ###RII
SRZHU
XW
㞔# POWER ON
㞔# STAND BY ON
㞏
#
The distance of Tx and Rx for best performance is 4m to 6m.
㞏
#
If LINK LED does not light on, make WL-T1000 and WL-R1000 power off and then on.
NOTE
㞏
# Do not use the power switch on WL-T1000 and WL-R1000 if possible.
㞏
# When plugging off and then on one of WL-T1000 and WL-R1000 or switch off then, you should
plug off and then on one of the other.
NOTE
Edvlf#rshudwlrq