DS-2068-F Wireless no-connect mouse
User Manual
Welcome
Thank you for selecting this product! Your RF wireless optical mouse uses a newly developed RF
wireless technology 27MHz that replaces the traditional wired mouse. You can use your wireless
optical mouse freely and improve your efficiency and enjoy your beautiful life from the high
technology.
Product Features
1. Radio frequency 27MHz, enjoy your freely wireless space
2. It has 256 ID code, no need connect before used.there is no interference even many mice
being used at the same time
.
3. Automatically save power sleeping functions, battery life be prolonged.
Systems Compatibility
IBM PC and Win 95/98/Me/2000/XP
No need driv
er
The Steps of Install Battery
1. Please prepare for two PCS new AAA alkaline batteries
2. Press the button of the mouse upper cover and pull the battery cover rearward (Please see the
reference picture)
3. Please insert the batteries correctly according to the polarity marks of the battery grooves.
4.
Pull the battery covers forward, when you hear ”crack” sound which shows the battery cover
is locked successfully.
Receiver Installation
1. If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the connector
before your computer start-up.
2. For laptop, you may connect the receiver directly with the USB connector.
3.
If you use desk PC, there is a little far between the case and your working surface, suggest
you use an extended USB cable to connect your case and the receiver, so you can place the
receiver on your working surface conveniently.
按压开盖钮以
便打开电池盖
ID Setup
1. Please move the mouse near to the receiver
2. Press the ID button of the receiver by your hand, the receiver light begin to flash
3. Press the ID button of the mouse bottom with some hard and acuate object within 10 seconds,
the receiver light will flash very fast, a few seconds later it will be on which shows it is
successfully to finish the digital transmission between the mouse and the receiver. You may
Press the button to open
the upper cover
