3
Easee Base
The Easee Base is a modular charging post for mounting
up to four Easee Charging Robots.
With Easee Base, it is possible to choose between
multiple configurations: 1-Way setup, where only one
charger is mounted; 2-Way setup, with two chargers;
and Multi-Way setup, with up to 4 chargers installed.
With multiple configurations in one design, they share
many common parts. Only a few parts are specific to
each type of layout.
Conventions
This symbol indicates that the respective
instructions must only be carried out by an
authorised electrician.
This symbol indicates an immediate danger to
life and health of individuals due to the effects
of electrical energy. Non-observance of these
instructions will result in serious damage to
health – up to and including life-threatening
injuries.
Introduction
Technical
specifications
General
Dimension (mm): H: 1500 x W: 160 x D: 80
Weight: 6.1–7.7 kg
Material: Aluminium
Finish: Powder coating
Colour: Black
IP degree: IP44
Features
Adapter plate for c/c 160 mm foundation
45 degree rotation intervals (using the adapter plate)
Screws and nuts included
Electrical connection
Connection via Power Rail
Possibility of serial connection of posts
Cable size
In and out of the post: Max 25 mm
2
Up to the chargers: 6 mm
2
Cable length (between chargers and Power Rail): 135 cm
