50
A. After the lower basket, has been removed, unscrew and remove the cap
from the salt container. 1
B. Place the end of the funnel (supplied) into the hole and introduce about
1.5kg of dishwasher salt.
C. Full fill the salt container with water, it is normal for a small amount of
water to come out of the salt container.
D. After filling the container, screw the cap tightly back clockwise.
E. The salt warning light will stop being after the salt container has been
filled with salt.
F. Immediately after filling the salt into the salt container, a washing
program should be started (we suggest to use a short program).
Otherwise the filter system, pump or other important parts of the machine
may be damaged by salty water. This is out of warranty.
NOTE:
1. The salt container must only be refilled when the salt warning light in the
control panel comes on. Depending on how well the salt dissolves, the
salt warning light may still be on even though the salt container is filled.
If there is no salt warning light in the control panel (for some models),
you can estimate when to fill the salt into the softener by the cycles that
the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to
remove the excessive salt.
4.3
Fill the rinse aid dispenser
Rinse aid dispenser
The rinse aid is released during the final rinse to prevent water from forming
droplets on your dishes, which can leave spots and streaks. It also improves
drying by allowing water to roll off the dishes. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door next to
the detergent dispenser. To fill the dispenser, open the cap and pour the rinse
aid into the dispenser until the level indicator turns completely black. The
volume of the rinse aid container is about 110ml.
1
Open
2
V.1