background image

5-YEAR LIMITED WARRANTY

Earthway Products, Inc. warrants this product free of defects in original workmanship and materials for a 

period of 5-Years to the end user with the original purchase receipt.  If a manufacturing non-conformance 

is found, Earthway Products, Inc. at its discretion will repair or replace the part(s) or product at no charge 

provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal 

wear and tear as determined by Earthway.  Earthway at its discretion may require that the part(s) or product 

be returned along with the original purchase receipt at owners’ expense for examination and compliance 

with the terms of this warranty.  Do not return any product without first receiving authorization from 

Earthway Products, Inc. To seek remedy under this warranty, contact Earthway Products, Inc. at 574-848-

7491, [email protected] or write to Earthway Products, Inc. P.O. Box 547 Bristol, Indiana 46507 and 

describe the nature of the manufacturing defect.  

SPECIFIC LIMITATIONS:

  This warranty covers only the part(s) 

or product; any labor charges associated with repair or replacement of non-conformances are specifically 

excluded.  Due to the corrosive nature of most fertilizers and ice melt products, Earthway Products, Inc. makes 

no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or its 

effects. Only use granular materials, the use of Rock Salt or other large size material will void the warranty.  

Clean and dry

 your spreader thoroughly after each use, as a preventative measure, coat all metal parts (inside 

and outside of the steel tubing) with a light oil or silicon spray.

Operation and Assembly Manual

 

for the 

M30

12-volt 

ATV 

Broadcast Spreader

1-2012 Part # 52195

Summary of Contents for EV-N-SPRED M30







Reviews: