Assembly and Operation Instructions
90309_M52169_December2023
PAGE 3
Step 3:
Install the
sprayer
handle assembly
into the two
lower handle holes
using (2)
¼” X
2 1/4”
screws
.
Secure with
(2)
lock nuts.
Note:
Make sure the on/off
switch is facing up, and be sure
to maneuver around the wires in
the handle shaft.
Step 4:
Plug the two
connection wires into the
red
motor connection wires.
Note:
The color of the wires
do
not make a difference.
Step 5:
Remove the (2)
¼-20 X
1 ½”
screws and (2)
lock nuts
from the
frame
. With the sprayer
tilted all the way forward, put a
foot on the
silver axle
and a
hand on the
frame
. Pull the
frame towards yourself to lift the
tank assembly.