background image

Operator's Manual

Rolling String Trimmer 600050V, 600050B

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

Operator's Manual

Rolling String Trimmer 600050V, 600050B

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

1-YEAR LimitEd WARRAntY

terms and Conditions

Ardisam, Inc., a manufacturing company, warrants this

 EARthquAkE® RoLLing StRing tiRimmER 

to be free 

from defects in the material or workmanship for a period of one year from the date of purchase.  During the one year 

warranty of this product, Ardisam will furnish 100% parts and labor to correct any defect caused by faulty material or 

workmanship. Any unit used in a commercial application is covered for a period of 90 days after purchase.

If warranty work needs to be done, contact your place of purchase or Ardisam, Inc. for an authorized service center 

in your area. Ardisam will make the necessary repairs if a service center is not available. 

to obtain warranty service 

and/or replacement instructions, you must have prior approval from Ardisam before shipping your 

package to us by calling our customer service department at 800-345-6007 for a return material authori-

zation number (RmA#). 

All items must be shipped prepaid. Ardisam, Inc. will at no charge, repair or replace, at their 

discretion, any defective part which falls under the conditions stated above.

Ardisam retains the right to change models, specifications and price without notice. This product if used as intended, 

will give you years of trouble free service. We hope you will enjoy the quality of our products for years to come. 

For replacement parts, phone 800-345-6007 or go online to www.GetEarthquake.com.

This warranty applies to the original owner with a proof of purchase and is not transferable. It supersedes all other warranties 

either expressed or implied and all other obligations to liabilities on our part.  Ardisam, Inc. does not assume, and does not 

authorize any other person to assume for us, any liability in connection with the sale of our products.

The warranty applies only to products which have not been subjected to negligent use, misuse, alteration, accident 

or repairs made by anyone not certified by Ardisam, Inc. This guarantee is void unless the warranty card is properly 

filled out and received by Ardisam, Inc., within 30 days of purchase or go to www.GetEarthquake.com for online 

registration.

REgiStRAtion, SERViCE And mAintEnAnCE Log

Record the model number and serial number in the space provided for easy reference.  Warranty is valid only if the completed 

registration is received by Ardisam, Inc. within 30 days of purchase.  If you do not have a computer, call our customer service 

department  at (800) 345-6007 Mondays through Fridays from 8 a.m. to 5 p.m. CST.  

oWnERShiP RECoRdS
Owner’s Name:
Owner’s Address:
City:

State/Province:

Zip Code/Postal Code:

Model Number:

Serial Number:

Date of Purchase:
Notes:

Summary of Contents for 600050V

























Reviews: