Your Ellora
™
table is equipped with a foot pedal
that raises and lowers the entire table. The left
button lowers the table and the right button
raises it.
DO NOT REMOVE THE
SAFETY GUARD FROM
THE FOOT PEDAL
Raise entire table
Lower entire table
The Ellora
™
comes out of the shipping crate ready to go to work. The foot control is already connected,
allowing you to simply raise and lower the table with your feet while your hands remain free to focus on
your clients. The left foot pad (-) lowers the table and the right foot pad (+) raises the table. The height
adjustment range of the Ellora
™
is 18” at its lowest position and 36” at its highest.
There is no on/off switch on the foot control, so even while the table is not in use, the foot control is still
operable. There is a potential for harm or bodily injury when the foot control is being depressed. We
recommend unplugging the table from the power outlet when not in use.
B
(+) Table Up
(–) Table Down
HEIGHT ADJUSTMENT
FOOT CONTROL OPERATION
10
The Ellora
™
is not equipped with a safety shut off or crush sensor. The area
directly underneath the Ellora
™
(designated by the space inside the dotted line in
(Diagram B) must remain clear of all objects during operation.
Keep small children away from the table at all times.
