Putting Your Headset On
p/n 2001 and 2002
NOTE
See Page 12 for Set-Up of
Convertible Headsets.
To put your headset on, slide the headband entirely open to its
largest size. Place the headset on your head so that the speaker(s) are
on your ear(s) in a comfortable position. While holding the speaker(s)
in place, slide the headband closed (equally on both sides if a dual-
ear model) until the headband rests on the top of your head
comfortably and securely.
NOTE:
When using a single-ear model, follow the same steps
above by holding the speaker on the preferred ear and
positioning the padded T-Bar above the opposite ear before
sliding the headband closed. The headband on the single-ear
model will only slide open and closed on the side with the
speaker.
9
Binaural
Headset
Monaural
Headset
Summary of Contents for Chameleon 2001
Page 1: ......
Page 2: ......
Page 8: ...3 CLASSIC CONVERTIBLE CONFIGURATIONS p n 2003 Headband Configuration Ear Loop Configuration...
Page 35: ......