IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE !
Copyright © 2016 by E&G Corporation, LLC. All right reserved. The reproduction or uti li za tion of this work in any form or any elec tron ic, me chan i cal, or other means, no known or here af ter in vent ed,
including xe rog ra phy, pho to copy ing, and re cord ing, and in any in for ma tion storage retrieval system is for bid den with out written per mis sion of owners.
Notes to the Technician/Installer:
E&G is proud to present this package to you and reminds you that for technical in for ma tion, contact technical as-
sistance at 410-381-4900. Do not at tempt the in stal la tion of any E&G prod uct without first reading the detailed in -
struc tions.
E&G will not war rant dam aged parts or the ve hi cle due to altered in stal la tion procedures.
07/05/2016
2
.
Using a small flat blade screwdriver, begin prying out the factory
chrome mouldings starting at the sides.
Copyright 2016 by E&G Corporation, LLC.
Visit us online today at www.egclassics.com
2016 GMC Sierra SLT & SLE
3 Piece “Denali Style” Grilles
TOOLS REQUIRED
Automotive grade masking tape, plastic clip removal tool, electric drill, 9/64”, 5/32” and 1/16” drill bits, 1/4” nut
driver, flat blade screwdriver, glass cleaner and soft, clean cloths.
Upper Overlays - Will not fit base or factory Denali models
1
.
Apply masking tape to the painted filler between the grille and the
bumper to help protect the paint finish.
3
.
Continue to pull the mouldings off the factory grille. The mouldings
will either unclip or the mounting tabs will break off. These mould-
ings are not reused.
3
2
1
SLT Part # 1091-018U-16 / SLE Part #1091-058U-16
3
Important: If the factory grille on the vehicle you are working on does not have three chrome
rectangular openings, please call technical support at 410-381-4900 before proceeding.
4
.
For “SLE” grilles only: Use a 5/32” drill bit to enlarge the factory
mounting slots (where shown, each side) prior to E&G grille sec-
tion alignment.
4
