1
INSTALLATION
You have screws for installation in the accessory bag listed below:
①
Screw M6X25 (4)
②
Screw M6X15 (4)
③
Self-Tapping Screw 4X12 (2)
Install the pedal cross bar to the side board
1. Down wards the side board with the rubber feet up. Start assembly with the left side
board of the stand. Screw
①
Location stud
Align the location stud in the pedal cross bar to the hole in the side board then attach the
pedal bar to the stand. Fix it with screw
①.
2. Install the pedal cross bar to the right side board in the same way. Screw
①