background image

 

 

 

IMPORTANT  

Installer and Users please note:  

These instructions should be read carefully and left with the user of the product for future reference.  

Before Use  

You must inspect the product including its cable and plug for any signs of damage. If the product is 
damaged, DO NOT use it, and contact your supplier immediately.  

Product Safety  

• This product can be used by children aged from 8 years and above and persons with reduced 
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given 
supervision or instruction concerning use of the product in a safe way and understand the hazards 
involved.   
• Children shall not play with the product.   
• Cleaning and user maintenance shall not be made by children without supervision.  
• For indoor use only.  
• Make sure that air intakes and exhausts are not obstructed.  
• Do not use this product in the immediate surroundings of a bath, shower or swimming pool.  
• Do not place the mains lead beneath a carpet or rug.  
• Do not insert any object into this product through the grilles. This may damage the heater or result 
in overheating or electric shock.  

PAT Testing  

When used in a workplace, this product must be safety-tested yearly by a qualified electrician (PAT 
Tested) in order to comply with the Electricity at Work Regulations.  If hired out, it must be PAT 
tested prior to each hire. We recommend that it is PAT tested regularly when used in a domestic 
environment. 

General Safety Requirements  

Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or 
at every change of occupancy. For office and retail premises, and buildings such as village halls, the 
wiring must be inspected at least once every 5 years. It is recommended that all building be fitted 
with smoke alarms (it is mandatory for new buildings).  

Disposal and Recycling 

You must not dispose of this appliance with domestic household waste. Most local authorities have 
specific collection system for appliances and disposal is free of charge to the end-user. When 
replacing an existing appliance with a similar new appliance your retailer may take the old appliance 
for disposal. 

 

 

 

 

 

Summary of Contents for P650C







Reviews: