background image

7

MENUS
The Accura 240 uses menus extensively to guide you through the
functions and features of the unit. To use the menus, simply press the
MENU key. The options on the menus let you to customize the unit to your
particular needs and water conditions. Use the up and down arrow keys to
move to different menus. The left and right arrow keys select and adjust
menu items. If you ever get lost in a menu, simply press the EXIT key. This
clears the menus from the screen.

MODES
The Accura 240 has five modes:
Fastrak™, digital/chart, split-chart, full
chart, and window groups.  To select a
different mode, simply press the MODE
key. A screen similar to the one at right
appears. Press the up or down arrow
key to select the desired mode, then
press EXIT key to erase the modes
menu. A summary of the modes starts
on the next page.

OPERATION

POWER/LIGHTS
To turn the Accura 240 on, simply
press the PWR key. A screen similar
to the one at right appears.

The PWR key also controls the lights.
Once the Accura 240 is turned on,
press the PWR key to turn the lights
on. Press the PWR key again to turn
the lights off.

To turn the Accura 240 off, press and
hold the PWR key while a "countdown" appears on the screen. The unit will
shut itself off when the countdown reaches zero. Release the PWR key.

Summary of Contents for Accura 240



































Reviews:

Related manuals for Accura 240