(underside
view of seat)
Lay on
top of
split
sleeves.
ASSEMBLY INSTRUCTIONS
Gowning Benches with Undershelf
—36˝, 48˝, and 60˝ in length
If your gowning rack is 72˝-long, refer to reverse page.
PART #A222014
EG10073 Revised 10/07
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2007 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE
.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
(End)
Step 2 - Mount undershelf.
split
sleeves
undershelf
seat
split
sleeve
post
Step 1 - Attach split sleeves (for undershelf)
to lowest groove on posts.
• The wider part of the taper goes toward the bottom.
• Make sure rib on split sleeve is seated into a groove
on the post.
split
sleeve
corner
collar
post
Step 3: Secure undershelf.
Note: Do NOT hammer directly
on wire or corner.
Step 4: Attach seat to posts.
Please note: If additional undershelf was ordered, install
now by repeating Steps 1 through 3,
attaching split sleeves onto middle of posts. Otherwise, proceed to Step 4 below.
Tap with
rubber
mallet.
Place board
across shelf
corners.
split
sleeves
Step 5: Secure
feet to the floor.
Hardware not
included.
Assembly is complete.