ASSEMBLY INSTRUCTIONS
Enclosed Drawers for
Tables with Channel Frame
Drawers #501572, 502943, 502946, 502947, 502971 and 502972
eG9834
revised 10/12
#1
eagle Foodservice equipment, eagle Mhc, specFAB
®
, and retail Display are divisions of eagle Group. ©2012 by the eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
* For 20˝ x 20˝ bowls: these screws are premounted to the table
channel framing (underneath tabletop), and will be used to mount
drawer angles.
For 15˝ x 20˝ bowls: screws can be found in the hardware package
provided with drawer.
Parts List
CAUTION
insPect contents iMMeDiAteLY AnD FiLe cLAiM With DeLiVerinG cArrier For AnY DAMAGe.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
You Are resPonsiBLe For DAMAGe to Your unit iF returneD iMProPerLY PAcKeD.
(continued on Page 2)
#4
#2
(actual size of hardware)
#1
#3
#2
#4
#4
#5
#3
Tools needed:
• 11/32˝ or 9mm socket or wrench
• Phillips screwdriver
• Tape measure
“Channels,” indicated in illustration at right,
run left-to-right underneath tabletop.
How to determine if you have a “channel frame” table:
If your table framing does not resemble the framing above,
turn to page 5 for “Drawers for Tables with Angle Frames.”
channels
#
qty
description
part #
#1
4
Drawer Mounting Bracket Angles
373770
#2
4
Drive screw, #12 x 3/4˝
313630
#3
8
Machine screw, #8 x 3/8˝
373748
#4
8
Lock nut, #8
313196
#5
1
Drawer Assembly
varies per order
*
instruction sheet
#336672
