Assembly Instructions For TT-Scale
Studebaker US6 2 ½ ton Cargo Truck
Page 1
Production of the US6 truck started in 1941
and over 200,000 were built during World War 2.
Over 150,000 were exported under the lend-lease
program mostly to Russia. The US military used
these trucks in the construction of the Burma Road
and in North America on the Alcan (Alaska) highway.
Parts Included in the kit:
A. 3D printed chassis.
B. 3D printed cab
C. 3D printed cargo bed
D. Decal
Required to complete the kit:
Paint - Flat black and flat army olive for US Army
(Testors 1165 or Tamiya XF49)
Paint - Flat black and flat army green for Red Army
(Humbrol 76 or Tamiya XF74)
Glue - Slow setting CA is best.
Tools Required:
1. X-acto knife with a sharp #11 blade.
2. #400 and #600 sandpaper.
www.eaelec.com
Made in Canada
WARNING: CHOKING HAZARD
Keep out of reach of small
children!
Note that these ARE NOT TOYS,
AND ARE NOT INTENDED FOR
USE BY CHILDREN UNDER
AGE OF 14. These products are
model railroad equipment and
accessories intended for use by
adults.
U.S.A.
4352931
U.S.A.
4352931
Decal
US6 Painting and Decal Placement for US Army
Decal
Decal
Olive
Olive
Olive
Olive
Olive
Olive
Olive
Olive
Olive
Decal
Top View
Left View
Right View
Decal
