EAE MONA SWITCH V2, Product Manual, Page: 33 / 34

Product Manual Mona Switch V2
EAE KNX Mona Series
MONA Switch R3.0
©
EAE Technology www.eaetechnology.com Page 33 / 34
4.7.3. Outputs
4.7. 3.1. OUT1…15
Parameter Settings Description
Name
32 chracters are
allowed. (Optional)
Any name can be defined for each Output. Name will
be shown in ETS Parameters and Group Objects page.
Register checked/ unchecked
This function is used to set the chosen output as Input
Operand. Result of relevant output can be used as
input for another Output.
OPERANDS
IN1…IN15 checked/ unchecked This parameter is used to select Logic Input(s) which
needs for reletad Output operation.
STATE checked/ unchecked This parameter defines the value of result. It can be
used as operand in Output operation.
FUNCTION
Description
80 chracters are
allowed. (Optional)
Any name can be defined for description of function.
Description will not shown anywhere.
Data Type 1-bit / 2-bit / 1-byte
Output operation data type can be selected
individually.
Operation
Passthrough
(unary)
NOT (unary)
AND
NAND
OR
NOR
XOR
XNOR
Sum is 1
NOT Sum is 1
Sum is 0 or 1
NOT Sum is 0 or 1
All 0’s or All 1’s
NOT All 0’s or All 1’s
Passthrough: It should be used with single operand
only. Result will be the same as related operand value.
NOT: It should be used with single operand only.
Result will be reverted according to related operand
value.
AND: Selected Inputs will be multiplied consecutively
and result value will be sent after.
NAND:
Selected Inputs will be multiplied
consecutively and result value will be sent as inverted
after.
OR: Selected Inputs will be summed consecutively
and result value will be sent after.
NOR: Selected Inputs will be summed consecutively
and result value will be sent as inverted after.
XOR: Selected inputs will be summed according to EX-
OR gate and result value will be sent after.
XNOR: Selected inputs will be summed according to
EX-OR gate and result value will be sent as inverted
after.
Sum is 1: If the one of the Input is “True” and rest of
all is “False” the result will be “True”. If multiple
inputs are “True” or all “False”, then result will be
“False”.
NOT Sum is 1:
If the one of the Input is “True” and rest
of all is “False” the result will be “False”. If multiple
inputs are “True” or all “False”, then result will be
“True”.
Sum is 1 or 0: If the one of the input is “True” and rest
of all are “False” or all inputs are “False”, the result
will be “True”. If 2 or more inputs are “True”, the
result will be “False”.