Product Manual Mona Switch V2
EAE KNX Mona Series
MONA Switch R3.0
©
EAE Technology www.eaetechnology.com Page 24 / 34
4.6.3. Shutter
Selecting “Shutter” for “Push Button Function” enables shutter operation for push buttons. Shutter
functions can be configured to control two different shutter operations “Shutter/Venetian Blind”
function or “Blind/Roller/Awning” function. In both function
s push button can be configured as 3
different button function; Up, Down and Toggle. When push button selected as up or down, that button
can only move the blind and lamella to the configured direction. For example, if configured as up button,
push button can be used to move the blind up and adjust the lamella down. If push button configured as
toggle button, single button can be used to move the blind up
–
down and adjust lamella up
–
down.
Venetian Blind Function
When “Controller Type” configured as “Shutter/Venetian Blind”, lamella operations of blind control will
be enabled as “short press” function of the push button. Also, “Button Function” parameter enables the
use of push button 3 different ways;
Up
: “Long Press” moves the blind upwards; “Short Press” operates two different ways, short pressed while
the blind is moving, stops the blind, short pressed while the blind is not moving adjust the lamella position
down.
Down
: “Long Press” moves the blind downwards; “Short Press” operates two different ways, short
pressed while the blind is moving, stops the blind, short pressed while the blind is not moving adjust the
lamella position up.
Toggle
: “Long Press” moves the blind upwards or downwards toggling the last “Long Press” action. For
example, if last state was up, when push button long pressed, it will send “Down” telegram.
Every time push button long pressed it will toggle its last state. If push button short pressed while the
blind is moving upward or
downward “Short Press” will stop the blind, if the blind is not moving “Short
Press” will adjust the lamella. Lamella adjustment will operate respective to the last state, for example if
the last “Long Press” action was up, then lamella will be adjusted do
wn when push button short pressed
and if the last “Long Press” action was down, then lamella will be adjusted up when push button short
pressed.