EAE MONA SWITCH V2, Product Manual, Page: 13 / 34

Product Manual Mona Switch V2
EAE KNX Mona Series
MONA Switch R3.0
©
EAE Technology www.eaetechnology.com Page 13 / 34
4.2. LED Brightness
This function is used to dim the buttons according to Bright (ON) and Dark (OFF) dim levels. Additionally,
the buttons can be dimmed with another methods such as Ambient Light or Proximity dim.
4.2.1. Parameters
4.2.2. Communication Objects
No Object Name Function Data Point Type Flags
79 Day/Night
0=Day; 1=Night 1 bit DPT 1.001
CW
0=Night; 1=Day 1 bit DPT 1.006
Day or night mode can be selected via object.
80 Proximity
0=Absence; 1=Presence 1 bit DPT 1.011
CT
CW
CWT
BIT6: 0=Presence; 1=Absence 1 Byte DPT 26.001
CT
CW
CWT
Proximity information value will be sent/received via object.
75
LED Brightness Custom Level 0=Off, 1…7 1 Byte DPT 5.010 CRW(T)
LED Brightness Custom Level [%] 0%=0(Off); [0,4…100]%=1…7 1 Byte DPT 5.001 CRW(T)
LED Brightness Custom Level
Raw [%]
0%=Off; [0,4…100]% 1 Byte DPT 5.001 CRW(T)
Custom Brightness level for Status LEDs can be changed via object.
Parameter Setting Description
BRIGHTNESS LEVELS
Bright Level 0 = OFF, 1, 2, 3, 4, 5, 6, 7 The bright dim level can be set.
Dark Level 0 = OFF, 1 , 2, 3, 4, 5, 6, 7 The dark dim level can be set.
Custom Level 0 = OFF, 1 , 2, 3, 4, 5, 6, 7 The custom dim level can be set.
Custom Level Object checked/ unchecked
This parameter is used to activate
custom level com objects to change
custom dim level interactively.
Object DPT
Enumerated,
Scaling [%] Level,
Scaling [%] Raw
This parameter will be shown If Custom
Level Objects are Enabled. Custom dim
level can be changed with these objects.
Object Feedback
None,
After KNX bus recovery only,
On change,
Always This parameter is used to transmit
status value of Custom Level brightness.
Value after KNX bus
recovery
Reset, Keep
This parameter is used to send custom
brightness level after bus voltage return.
STATUS LEDS AUTO-DIM (Bright -> Dark)
Ambient Light Dim
unchecked / checked / *Detection
Disabled
Auto dim switch status leds to darker
according to Day/Night state.
Proximity Dim
unchecked / checked / *Detection
Disabled
Auto dim switch status leds to darker
according to touch to the buttons.