EAE DA110, Product Manual, Page: 3 / 22

Product Manual DA110
EAE KNX DALI Gateway
DA110 R2.0
©
EAE Technology www.eaetechnology.com Page 2 / 21
1. General
1.1. Device Description
DA110 KNX-DALI Gateway operates as an interface device between KNX bus and DALI bus. Device can
control 64 DALI devices on a DALI line. This DALI line is powered by internal power supply. DALI
compatible ECGs (electronic control gear) can be controlled individually.
Device features are listed below;

Maximum 64 DALI devices (e.g. electronic ballast, transformer) can be connected to DALI output.

DA110 enables to control 64 DALI devices individually and can store 16 different lighting scenes.

Fault statuses of DALI devices can be monitored by both device based via different communication
objects on the KNX.

Bus voltage fail/return states can be selected on ETS parameters.

Addressing of DALI devices is made via EAE DALI Tool (PC Software). DALI Tool can be downloaded
from website.
www.eaetechnology.com .
NOTE: Each channel is uniform. Device factory default physical address is “15.15.255”.