E2S BExCBG05-05D-P, Instruction Manual, Page: 1 / 16

INSTRUCTION MANUAL
BExCBG05-05D-P
Combined Beacon/ Beacon
ATEx/IECEx & UKEx Gas & Dust
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880
Document No. D210-00-701-IS Issue 5 12-09-2022 Sheet 1 of 7
BExCBG05-05D-P
1. Product Table
Unit Type Code
Nominal
Input
Voltage
Chamber
Beacon
Nominal
Input Current
Cover Beacon
Nominal
Input Current
Max I/P Voltage
BExCBG05-05DPDC012 12Vdc 750mA 750mA 14V
BExCBG05-05DPDC024 24Vdc 300mA 300mA 28V
BExCBG05-05DPDC048 48Vdc 180mA 180mA 54V
BExCBG05-05DPAC115 115Vac 140mA 140mA 126V
BExCBG05-05DPAC230 230Vac 55mA 55mA 253V
The table shows the input current taken by the various units.
Nominal current at nominal voltage.
Table 1: Electrical Ratings.
It is important that a suitable power supply is used to run the equipment. The power supply selected must have the necessary capacity
to provide the input current to all of the units.
The above table shows the input current taken by the various units and shows the maximum voltage at which they can be operated:
The input current will vary according to the voltage input level an flash rates selected.
2. Warnings

DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT

DO NOT OPEN WHEN ENERGIZED

POTENTIAL ELECTROSTATIC CHARGING HAZARD – CLEAN ONLY WITH A DAMP CLOTH

COVER BOLTS CLASS A4-80

USE HEAT RESISTING CABLES AND CABLE GLANDS (RATED 110°C) AT AMB. TEMPERATURES OVER
40°C