12
GENERAL TROUBLESHOOTING
Checklist
When the products have any problems, please refer to the following methods.
a) LED display black screen
Reason: Exposure under the sun for too long.
Solution: Place it in shadow and it will return to normal after a period.
b) Values from the display do not fit the actual values.
Reason: Parameters are set incorrectly or missing.
Solution: Please reset the display to the factory settings.
c) No information on digital display
Reason: Bad battery contacts or the battery is dead.
Solution: Turn off the power then restart again, if the problem still occurs, please contact your local
reseller.
In case that the product still does not operate normally, please contact your local vendor or
reseller.
SCOOTER SETTINGS
The cruise control function can be activated/ deactivated following the instructions below:
Turn off the scooter;
Press the brake handle all the way down and with the brake handle pressed like this turn on
the scooter;
Do not release the brake handle;
With the brake handle still pressed all the way through, please press the acceleration
handle all the way down 2 times;
Release both handles;
Now the cruise control is activated;
To deactivate it please follow the same steps as above.
Using the same procedure as before, there are more functions you can use if you press the
acceleration handle (step 4) as follows:
- if you press the acceleration handle 2 times --> activate/ deactivate the cruise control function
- if you press the acceleration handle 3 times --> activate/ deactivate the kick start function
- if you press the acceleration handle 4 times --> deactivate the speed limit function
- if you press the acceleration handle 5 times --> activate a maximum speed limit of 25 km/h
- if you press the acceleration handle 6 times --> activate a maximum speed limit of 20 km/h
-
if you press the acceleration handle 7 times --> activate a maximum speed limit of 6 km/h
- if you press the acceleration handle 8 times --> activate a maximum speed limit of 12 km/h
