OPERATOR’S MANUAL
with Maintenance Information
Safety Rules
6
Operation on Slopes Hazard
Do not drive the machine on a slope that
exceeds the slope and side slope rating of the
machine.
Slope rating applies to machines only in the
stowed position.
Maximum slope rating stowed
Maximum side slope rating stowed
Model
A
B
S06-HAE
25% (14°)
25% (14°)
S0608-HAE
25% (14°)
25% (14°)
S0808-HAE
25% (14°)
25% (14°)
S0812-HAE
25% (14°)
25% (14°)
S1012-HAE
25% (14°)
25% (14°)
S1212-HAE
25% (14°)
25% (14°)
S1412-HAE
25% (14°)
25% (14°)
S06-ACE
25% (14°)
25% (14°)
S0608-ACE
25% (14°)
25% (14°)
S0808-ACE
25% (14°)
25% (14°)
S0812-ACE
25% (14°)
25% (14°)
S1012-ACE
25% (14°)
25% (14°)
S1212-ACE
25% (14°)
25% (14°)
S1412-ACE
25% (14°)
25% (14°)
Note: Slope rating is subject to ground
conditions and adequate traction.
Fall Hazard
The guard rail system provides fall protection.
If occupant(s) of the platform are required to
wear personal fall protection equipment (PFPE)
due to job site or employer rules, PFPE
equipment and its use shall be in accordance
with the PFPE manufacturer’s instructions and
applicable governmental requirements.
Do not sit, stand or climb on the platform guard
rails. Maintain a firm footing on the platform
floor at all times.
Do not climb down from the platform when
raised.
Keep the platform floor clear of debris.
Close the entry gate before operating.
Do not operate the machine unless the guard
rails are properly installed and the entry is
secured for operation.
Do not enter or exit the platform unless the
machine is in the stowed position.
Collision Hazard
Be aware of limited sight distance and blind
spots when driving or operating.
Be aware of extended platform position(s)
when moving the machine.
Check the work area for overhead obstructions
or other possible hazards.
