background image

FILE: IM401 service manual.doc                                                                                                  2006.01.10

 

E-TECH Co., Ltd                                                                                                                                      6/24

 

 

4-2

 

LCD Display and Icons 

 

1.ANT GAZE ; Shows the received signal strength. 

2.TX POWER HIGH: Indicate power level 

3.KEY LOCK: Appears during key lock function is ON. 

4.ALART(BEEP) ON/OFF: Appears when beep sound is turned ON. 

5.VOX ON/OFF: Appears when VOX function is turned On. 

6.SCAN: Appears when Scan function is activated. 

7.SCRAMBLE: Appears while the voice scrambler function is activated. 

8.TALK AROUND Indicator. 

4-3 Features 

1. Channel   

This radio offers up to 255 channels 

1). By using 

 or 

 button,  you can select the desired channel. 

 

2. Missed calls list 

Up to 16 calls can be stored.    If the same radio calls more than once, only the most recent call is stored.   

When fifteen calls have been stored by the radio, depending on the radio programming the sixteenth call 

received may overwrite the first or not be stored by the radio. 

1). 

to enter Menu Mode. 

2) Display shows 

 

 

3)

 

 

to select 

4) 

or

  to scroll list 

5) 

to exit 

 

 

 

Summary of Contents for IM401

























Reviews: