SHANGHAI ESURVEY GNSS CO., LTD.
33
7.7
Set the Beep
The beep is an acoustic signal at right angles (0°, 90°, 180°, 270° or 0 gon, 100 gon, 200 gon, 300
gon).
To set the beep, do the following:
1. Press
→
R/L
to enter configuration mode.
2. Press
0SET
to turn to the following page:
3. Do one of the following:
o
To switch on the beep, press
R/L
to change the value to
ON
.
o
To switch off the beep, press
R/L
to change the value to
OFF
.
4. Press
to confirm selection.