WatchMinder2 Quick Start Instructions
Thank you for purchasing the WatchMinder2. In order to quickly get the WatchMinder operational, you
will first need to set the time/date and then turn the vibration feature to “on.” Please follow these steps and
then follow the final directions to set training and reminder alerts.
I. First Step: Set the Time and Date
1. Start by pushing and holding down TRAIN/SET, then immediately push TMR.
2. Y will appear with a number blinking. Push + or – to adjust the Year up or down. Push REMIND to set Year.
3. M will appear with a number blinking. Push + or – to adjust the Month up or down. Push REMIND to set Month.
4. D will appear with a number blinking. Push + or – to adjust the Day up or down. Push REMIND to set Day.
5. W will appear. DO NOT PUSH + or - . Immediately push REMIND.
6. H will appear with a number blinking. Push + or – to adjust Hour up or down. This is a 24 hour clock, so add 12 to
the PM time (2pm is 14). Push REMIND to set Hour.
7. M will appear with a number blinking. Push + or – to adjust Minutes up or down. Push REMIND to set Minute.
8. S will appear with a number blinking. Push + or – to adjust Seconds up or down. Push TRAIN to set Second.
The correct Time and Date will appear.
II. Second Step: Turn Vibration On
1. Start by pushing and holding down REMIND, then immediately push SW.
2. B (bell alert) will appear with OFF blinking. Push REMIND.
3. V (vibration alert) will appear with OFF blinking. Push + or - and ON will appear. Push TRAIN.
Vibration alert is set and icon will appear at bottom of screen.
OVER
