Version 1.1
8.4 The seatpost and saddle
①
Loosen the quick release and insert the saddle into the seatpost.
②
Straighten the angle of the saddle so that it is in line with the bike frame,
and adjust the height to a suitable height (be careful not to exceed the
seatpost safety line) and lock the quick release handle.
8.5 The pedals
①
Take out the pedals, pay attention to the left and right pedals. The letter R is printed on the right pedal
(drive side), and a letter L on the left pedal (non-drive side).
②
Place the right pedal on the drive side crank and thread the pedal spindle clockwise. Place the left pedal
on the non-drive side crank and thread the pedal spindle counterclockwise. Make sure both pedals are
locked into position using a 15 mm wrench.
10
