22
E-MU Systems
Setup
Connection Instructions
Connection
Instructions
Basic Setup
If Xtreme Lead does not
seem to be responding correctly,
make sure that both Xtreme
Lead and your MIDI controller
are set to the same MIDI
channel.
MIDI In
The Right Main output
jack serves as a mono output
when the Left Main plug is not
plugged in.
The Left Main output jack is a
stereo jack carrying both
channels when the right output
jack is empty.
XL-1 is controlled by MIDI messages received at the MIDI In jack. Normally
you will connect MIDI Out of a controller such as a MIDI keyboard to the
MIDI In jack of X-1. Be sure to connect a Footswitch and/or Control Pedal
to your MIDI keyboard. Many of the factory presets use MIDI controllers.
Outputs
In order to reproduce XL-1’s wide dynamic range and frequency response,
use a high quality amplification and speaker system such as a keyboard
amplifier or home stereo system. A stereo setup is highly desirable because
of the added realism of stereophonic sound. Headphones can be used if an
amplifier and speaker system is not available. Plug stereo headphones into
the headphone jack located on the left side of the front panel.
S C O T T S V
S C O T T S V A L L E Y C A . U . S . A .
A L L E Y C A . U . S . A .
B
IN
THRU
A
~
Main Outs to Mixer In
MIDI Out
Aux. or
Tape In
Male RCA plug
to
Male Phono Plug
To
Main Outs
Home Stereo
System
Home Studio
System
Speakers
Amp
Mixer
The Headphone
Output is located
on the Front Panel
Control
Pedal
Footswitch
EMULATOR
P R E S E T
S A M P L E
S E Q U E N C E R
P A G E
L E V E L
P R E S E T S E L E C T
R E A L T I M E C O N T R O L L E R S
A S S I G N A B L E K E Y S
E N T E R
E X I T
R E T U R N
0
.
9
8
7
6
5
4
3
2
1