Ematic_EHB150C_Instructions_Rev01
INSTALLATION INSTRUCTION
EHB150C
Please read these instructions before installation and retain for the user/maintenance engineer for future reference
•
Operating Temperature -40
～
+40
℃
•
IP65
Model
Input Voltage
Power
Factor
Watt
Total Watt
Incl Driver
CRI
Colour
Temperature
Input
Current
Dimensions
(mm)
Lumen
Output
Net
(Kg)
EHB150C
100-277v AC
≥0.9
150W
138-157W
>80
4000K
1.8A
Φ
276*180.5
19,000
3.2
IMPORTANT
Installation must be carried out by a skilled electrician who is familiar with the appropriate standards and
technical requirements of the appliance also taking in to consideration the latest building regulations.
The person carrying out the installation is to check and verify that the total load on the circuit, including
the rating of the cable, fuse and/or circuit breaker is not exceeded
Ensure there is adequate ventilation around the luminaire
Ensure the AC supply is isolated before installing or servicing
This product must be earthed
DO NOT
look or stare at the LED fitting directly when in close proximity once illuminated
Never modify the unit, there are no user serviceable parts inside