H685 User Manual
E
‐
Lins
Technology
Co.,Limited
Tel:
+86
‐
755
‐
29230581
E
‐
mail:
sales@e
‐
lins.com
www.szelins.com
www.e
‐
lins.com
Notes:
1) If the PPTP cannot through between client and server, please check if the MPPE
configuration is matched with PPTP server or not.
2) Normally PPTP server has route for 192.168.1.1/24 or 192.168.0.1/24. Please check the
PPTP server has the route of 192.168.8.0/24 if your H820 router is with IP 192.168.8.1.
For example, if H820 LAN IP is 192.168.8.1 and assigned PPTP IP is 172.1.1.2. Then at the
PPTP server, need add a route for 192.168.8.0/24 and gateway as 172.168.1.2. Meanwhile,
we suggest PPTP Server use fixed PPTP IP rule for PPTP client, otherwise need modify the
route’s gateway every time because the PPTP client gets a random PPTP IP.
5.11 IPSec sample
Preparation before test:
1) Take two H685/H685 router, one for IPSec Server, the other is for IPSec client. For formal application, recommend
use CISCO VPN Router for Server, and E-Lins Router for Client.
2) We configure Server Router gateway LAN IP as 192.168.8.1, and Client Router gateway LAN IP as 192.168.9.1.
Please refer to the manual chapter
3) Make Server Router and Client Router both online. Here we use Cell connection for both routers.
4) Sample topology is as follows,
