49
Figure 4-50
4.10.1.2 Encode
It is to set video bit stream, picture bit stream, video overlay parameter and etc.
4.10.1.2.1 Video
Video setting includes the following items. See Figure 4-51.
Channel: Select the channel you want.
Type: Please select from the dropdown list. There are three options: regular/motion detect/alarm.
You can set the various encode parameters for different record types.
Compression: System supports H.264.
Resolution: System supports various resolutions, you can select from the dropdown list. Please note
the option may vary due to different series.
Frame rate: It ranges from 1f/s to 30f/s in NTSC mode and 1f/s to 25f/s in PAL mode.
Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.
I Frame Interval: Here you can set the P frame amount between two I frames. The value ranges
from 1s to 2s, default value is 1s. Recommended value is frame rate *2.
Bit Rate
：
You can select bitrate value in the combo box.
Video/audio: You can enable or disable the video/audio.
Audio format: Please select from the dropdown list. There are three options: G711a/G711u/PCM
Audio source: Please select from the dropdown list. There are two options: normal/HDCVI. For
normal mode, the audio signal is from the Audio In port. For HDCVI mode, the audio signal is from
the coaxial cable of the camera.
Summary of Contents for CJ-HDR104
