96
Figure 4-112
4.10.5.7 Import/Export
The Import/Export interface is shown as below. See Figure 4-113.
This function allows you to import/export system configuration. You can use this function when there are
several devices need the same setup.
Export: Please connect the peripheral device first and then go to the following interface. Click
Export button, you can see there is a corresponding
“Config_Time” folder. Double click the folder,
you can view some backup files.
Import: Here you can import the configuration files from the peripheral device to current device. You
need to select a folder first. You can see a dialogue box asking you to select a folder if you are
selecting a file. System pops up a dialogue box if there is no configuration file under current folder.
After successfully import, system needs to reboot to activate new setup.
Format: Click Format button, system pops up a dialogue box for you to confirm current operation.
System begins format process after you click the OK button.
Note:
System can not open Import/Export interface again if there is backup operation in the process.
System refreshes device when you go to the Import/Export every time and set current directory as
the root directory of the peripheral device.
If you go to the Import/Export interface first and then insert the peripheral device, please click
Refresh button to view the newly added device.
Summary of Contents for CJ-HDR104
