![e-Line Technology Sibell NVR-SB64 User Manual Download Page 98](http://html1.mh-extra.com/html/e-line-technology/sibell-nvr-sb64/sibell-nvr-sb64_user-manual_3101240098.webp)
Remote Surveillance
NVR User Manual
92
Button
Meaning
Backup tasks button. Click it to view the backup status.
Event list button. Click it to view the event record of manual/schedule/sensor/motion.
12.4.3 Remote Backup
Click “Backup” in the remote interface to go to the backup interface. You can back up the
record by event or by time.
By Event
Check the record type on the left side of the interface and then click
to set the start time
and end time; check the cameras and then click
on the right side to search the record (the
searched record data will be displayed in the list); check the record data in the list and then
click “Backup” button to backup the record.
By Time
Click
to set the start time and end time on the left side of the interface; check the cameras
and then click
on the right side to backup the record.
View Backup Status
:
NOTE: In IE, you must add the NVR to “Trusted sites” in internet
options (Tools > Internet Options > security > trusted sites > “sites” button > add)
Click
“Backup Status” to view the backup status. Click “Pause” to pause the backup; click “Resume”
to continue the backup; click “Delete” to delete the task.
12.4.4 Remote Configuration
Click “Function Panel” in the remote interface and then configure the camera, record, alarm,
disk, network, account and authority and system of the NVR remotely. All of these settings are
similar to that of the NVR. See the configurations of the NVR for details.