Live Preview Introduction
NVR User Manual
32
2
Double click one camera group on the right side of the interface. The cameras in the group
will start camera group view one by one in the selected camera window.
You can also drag the group directly to any preview window. Right click on the group view
window and then click “Close Dwell” button to stop the view.
5.2.4 Scheme View In Sequence
Click Start
Settings
System
Basic
Output Settings to go to the interface as shown below.
Area
①
displays all the dwell schemes; area
②
shows the detailed information of the scheme;
area
③
displays all the cameras and groups; area
④
is the tool bar (
: clear button;
:
favorite button, click it to pop up a window, enter the display mode name in the window and
then click “OK” to save the current display mode; other buttons are screen mode buttons).
Add Scheme
Click
in area
①
to create a new scheme. Click
on the top right corner of the scheme
to delete it.
Configure Scheme
a)
Select a scheme in area
①
and then click the screen mode button on the tool bar to set the
screen mode of the scheme.
b)
Select a camera window in area
②
and then double click the camera or group in area
③
.
The camera or group will be added into the selected window. One camera in the same scheme
cannot repeat. You can click the right-click menu “Clear” in area
②
to remove a single camera
or click
to remove all the cameras.
c)
Click “Apply” to save the settings.
