FT
-3
0
5.10.01
© E.L.B. Ex-Geräte Bachmann
Rev. 1.9 Page 14
Mouse Not Detected
When using the mouse, it may not be detected by the computer. To remedy this
problem, try the following:
Make sure the mouse receiver cable (with the green end) is plugged into the right
port – serial or mouse port.
Make sure your serial (or mouse) port has the proper configuration. Refer to your
computer documentation for the correct port configuration.
You may have other system devices (e.g. a modem card) that conflict with the
mouse. Check the IRQ/address settings of these devices for conflicts, and
change the settings as required.
The Screen Cursor Does Not Move Properly or the Keyboard Does Not Display
Characters on the Screen When You Type
Clean the mouse ball and roller(s). See ”Mouse Maintenance” for more information.
Also change the position of your radio receiver, because it may be too far from the
mouse or keyboard or the computer monitor or a large metal object may be
interfering with the receiver’s radio reception. Try moving the receiver and/or mouse
to improve reception. Or the mouse batteries may be nearly dead. Check the mouse
batteries as described in ”Mouse or Keyboard Does Not Work upon Installation,” and
replace the batteries if required.
You may also need to change the channel for the keyboard/mouse. The computer
must be on and the receiver plugged in correctly. Press and release the Channel
button on the keyboard; the green Connect light on the receiver should blink. Press
and release the Channel button on the mouse; the green Connect light should blink
on the receiver.
9 Realizations
The Cordless EEx-Desktop (keyboard and mouse) can be delivered in the
following versions:
Description
Order Nr.
Ex-Mouse with EEx-Receiver
FM20-ER
Ex-Mouse with Receiver
FM20-NE
EEx-Cordless Desktop with EEx-Receiver US Layout
FT30-ER
EEx-Cordless Desktop with EEx-Receiver German Layout
FT30-ED
EEx-Cordless Desktop with Receiver US Layout
FT30-NE
EEx-Cordless Desktop with Receiver German Layout
FT30-ND
In case of an order please mention the length of the cable (1 m, 5 m, 10 m)
of the EEx-Receivers!