E-FLITE Park 180 Instructions Download Page 1

 

Park 180 Brushless Outrunner Instructions 

 

Thank you for purchasing the E-flite Park 180 Brushless Outrunner motor.  This motor is ideal for 3D models 2-3 oz 
(55-85g), and sport and scale models 3-6 oz (85-170g) or models requiring up to 30 watts of power. 

Park 180 Brushless Outrunner Features: 

• Ideal for 3D models 2-3 oz (55-85g) and sport and scale models 3-6 oz (85-170g)  
• Ideal for up to 30 watts 
• Designed for firewall mount or carbon tube mount 
• Includes mount, mounting hardware, and 2mm gold BL connectors 
• Extremely quiet and lightweight - just .3 ounces (8.5 grams) 
• Upgraded performance motor for indoor motors 
• High quality construction with ball bearings and hardened steel shaft 
• Slotted 12-pole outrunner design 
 

Park 180 Specifications 

 

  

Diameter: 16mm (.63 in)  

 

 

 

 

Case Length: 20mm (.80 in) 

 

 

 

 

Weight: 8.5 g (.30 oz) 

 

 

EFLM1120 

 

 

 

  

 

 

 

Kv: 2200 (rpms per volt)  

 

  

 

 

 

  

Io: .30A @ 8V (no load current)   

 

 

 

Ri: .91 ohms (resistance) 

 

 

  

 

 

Continuous 

Current: 

2.6A* 

   

    

Max Burst Current: 3.2A* 
Cells: 2-3S Li-Po or 4-8 Ni-MH/Ni-Cd 

 

  

Recommended Props: 3x3 to 6x3 ‘Slow Flyer’ for 2S or 4x4 to 4.5x3 for 3S 

  

  

Brushless ESC: 4A – 6A    

 

    

 
* Maximum Operating Temperature: 220 degrees Fahrenheit        
* Adequate cooling is required for all motor operation at maximum current levels.  
* Maximum Burst Current duration is 15 seconds.  Adequate time between maximum burst intervals is required for 
proper cooling and to avoid overheating the motor.   
* Maximum Burst Current rating is for 3D and limited motor run flights.  Lack of proper throttle management may result 
in damage to the motor since excessive use of burst current may overheat the motor.   
 

Battery Choices: 

There are many Li-Po battery brands on the market with several choices for consumers.  We recommend either E-flite 
or Thunder Power batteries and list some possible choices for the Park 180 Brushless Outrunner motor, depending on 
the airplane application. 
 
THP4802SJPL   

480mAh 2-Cell 7.4V LIPO, JST 

THP48023JPL    

480mAh 3-Cell 11.1V LIPO, JST 

 

 

Examples of Airplane Setups:  

 
Semi-Scale Aerobatic Biplane 
 
Weight w/Battery: 4.2 oz 
Prop 6 x 3 Slow Flyer 
Battery: 480mAh 2-Cell 7.4V Li-Po (THP4802SJPL) 
ESC: 4A-5A Brushless 
 
Comments – Great aerobatic performance with plenty of flight time. 

Summary of Contents for Park 180

Page 1: ...mmended Props 3x3 to 6x3 Slow Flyer for 2S or 4x4 to 4 5x3 for 3S Brushless ESC 4A 6A Maximum Operating Temperature 220 degrees Fahrenheit Adequate cooling is required for all motor operation at maximum current levels Maximum Burst Current duration is 15 seconds Adequate time between maximum burst intervals is required for proper cooling and to avoid overheating the motor Maximum Burst Current rat...

Page 2: ... any order to the three output wires or output port on a sensorless brushless speed control Be sure to use heat shrink tubing to properly insulate the wires so the wires will not short Shorting may damage the motor and speed control 4 If you add connectors and or you no longer wish to use them never cut the motor wires Remove them by properly de soldering them Shortening the motor wires is conside...

Page 3: ...eriod of 1 year from the date of purchase Limited Warranty a This warranty is limited to the original Purchaser Purchaser and is not transferable REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER This warranty covers only those Products purchased from an authorized Horizon dealer Third party transactions are not covered by this warranty Proof of purchas...

Page 4: ... be included but are not designed to withstand the rigors of shipping without additional protection Ship via a carrier that provides tracking and insurance for lost or damaged parcels as Horizon is not responsible for merchandise until it arrives and is accepted at our facility A Service Repair Request is available at www horizonhobby com on the Support tab If you do not have internet access pleas...

Reviews: