PULL DOWN MENUS
4-4
September 1994
Part No. 001-2008-300
Figure 4-9 ALARM CROSS REFERENCE
4.3.4 REPEATER TYPE
Select Universal Station. The programming
parameters are determined by this selection. Parame-
ters that are invalid for some types are shaded and
cannot be selected.
4.3.5 DELETE REPEATER
Figure 4-10 DELETE REPEATER
4.4 TRANSFER
Figure 4-11 TRANSFER MENU
4.4.1 WRITE SETUP PARAMETERS
This command sends the contents of a file to
program the Flash memory in the TPI card.
Figure 4-12 WRITE SETUP PARAMETERS
Figure 4-13 PROGRAM WRITE SETUP
4.4.2 READ SETUP PARAMETERS
This command reads the contents of the Flash
memory of the TPI card and loads it into a buffer. The
contents of the buffer is then displayed to show the
programming of the Universal Station.
Figure 4-14 READ SETUP PARAMETERS
Figure 4-15 READING SETUP
Select which Output Alarm is activated by each Input Alarm.
8. None
24. None
32. None
40. None
5. None
6. None
7. None
9. None
10. None
11. None
12. None
13. None
14. None
15. None
17. None
18. None
19. None
20. None
21. None
22. None
23. None
25. None
26. None
27. None
28. None
29. None
30. None
31. None
34. None
35. None
36. None
37. None
38. None
39. None
41. None
42. None
43. None
44. None
45. None
46. None
47. None
Alarm Cross Reference Selection
Press F2 to Accept
0. None
1. 1
2. 1
3. 2
4. 3
16. None
33. 4
Select Rptr To Delete
Rptr 1
File Edit Transfer Hardware Test Utilities
Read Setup Parms F5
Write Setup Parms F6
Edit Option Keys
Read TIC Calibration Data
Write TIC Calibration Data
Program Rptr 1
Ok
Cancel
Programming Setup Parameters
Count = 1
Ok
Cancel
Read Setup Parms?
Reading Setup Parameters
Attempting access to Repeater
