SMARTNET/SMARTZONE/P25 TRUNKED FEATURES
40
made in the clear mode by pressing the
C/S
(Clear/Secure) option switch (if encryption is
selectable on the channel). Otherwise, the correct
key must be loaded.
4. When the call is finished or is not answered, end it
by pressing the CALL option switch and placing the
microphone back on-hook.
6.5.3 PLACING A STANDARD PRIVATE CON-
VERSATION CALL
Recalling From A List
1. Momentarily press the
CALL
(Private Call) option
switch. The tag (alias) of the last called mobile is
displayed.
2. To select another mobile, rotate the Select switch
until the tag for the desired mobile is displayed.
3. Press the PTT switch and one of the following
events then occurs:
•
The called party answers the call.
•
The called party does not answer. Press the
CALL
option switch to end the call.
•
If the selected mobile ID is not valid, “INVALID
ID” is displayed and an alert tone sounds.
•
If the radio system is busy, four low tones sound
and “BUSY” is displayed. When the system is no
longer busy, the call back tone (four beeps) is
heard and the channel is automatically acquired.
Press the PTT switch to continue the call.
•
If the call is in the secure mode and your radio
does not have the proper encryption key,
“KEYFAIL” is displayed and the call must be
made in the clear mode by pressing the
C/S
(Clear/Secure) option switch (if encryption is
selectable on the channel). Otherwise, the correct
key must be loaded.
4. When the call is finished or if it is not answered, end
it by pressing the
CALL
option switch and placing
the microphone on-hook.
6.5.4 RECEIVING A PRIVATE CALL (ALL
TYPES)
1. When a private call or unit call is received, “CALL
RCVD” is displayed and the call tone sounds once.
2. To answer the call, press the
CALL
(Private/Unit
Call) option switch and then the PTT switch and
begin speaking. The unit ID of the calling mobile is
displayed. More information follows:
•
If the PTT switch is pressed before the
CALL
switch, the call is transmitted as a group call.
•
If private calls are not permitted (
CALL
switch not
programmed) press the
RESP
(Call Response)
option switch to respond.
•
The call must be answered within 20 seconds or it
is automatically terminated.
•
If the system is busy when a response is made,
“BUSY” is displayed and the busy tone sounds.
6.6 TELEPHONE CALLS
NOTE: Telephone calls are currently not available in
the P25 Trunked mode.
6.6.1 GENERAL
The telephone call feature* allows telephone calls
to be placed and received over the public telephone
system using your radio. The type of call (secure/
clear) is determined by the mode selected by the
C/S
(Clear/Secure) option switch. Telephone calling is
programmed to operate in one of the following modes:
•
Disabled (telephone calls not available)
•
Answer-only capability
•
List Only - Telephone numbers can be selected
from a preprogrammed list only (direct dialing
using a keypad is not allowed)
•
Unlimited - With the Handheld Control Unit
(HHC) only, phone numbers can be selected from
a list and also entered directly using the keypad
(future availability).
*
This feature requires 5300 firmware 1.20.0/2.0/3.0 or
later.
