manualshive.com logo in svg

E.F. Johnson 5100 SERIES, Operating Manual, Page: 37 / 47

Share
Download
E.F. Johnson 5100 SERIES Operating Manual Download Page 37

SMARTNET/SMARTZONE/P25 TRUNKED FEATURES

37

•

If the secure mode is selected by the Secure/Clear 
option switch or menu parameter and an attempt 
is made to transmit on a channel strapped as clear, 
“Clear Only” is displayed and the transmitter is 
disabled. Likewise, if the clear mode is selected 
and the channel is strapped as secure, “Secure 
Only” is displayed and the transmitter is disabled.

6.4.3  RECEIVING A STANDARD GROUP CALL

Calls are received on only the talk group and/or 

announcement group programmed for the selected 
channel (with scanning disabled). When the selected 
channel is programmed with both Talk and Announce-
ment groups, only the Talk and Announcement group 
IDs are detected. Other IDs in the Announcement 
group are detected only if no talk group is 
programmed. 

The display indicates the selected channel alias 

when a call is received. The transceiver can also be 
programmed so that the received talk group alias and/
or Individual ID of the calling mobile are displayed. 
The received talk group alias and the selected talk 
group alias are alternately displayed if they are 
different, and the Individual ID of the calling mobile is 
displayed briefly when the call is received. The time 
each is displayed is programmable* for 0.5-7.0 
seconds or infinite.

6.5 PRIVATE (UNIT-TO-UNIT) CALLS

NOTE: With P25 Trunked operation, these calls are 
called Unit Calls, and they function the same as 
Enhanced Private Conversation calls described in the 
following information.

6.5.1  GENERAL

Private calls allow calls to be placed to a specific 

mobile unit. Either the Enhanced Private Conversa-
tion™ or standard Private Conversation modes may be 
programmed depending on the capabilities of the radio 
system. One difference between these call types is that 
the Enhanced type provides an indication that the 
called mobile is not on the air and the standard version 
does not. Operation in each of these modes is 
described in the following information.

The Private Call option key is required to place 

these calls, and either that key or the Call Response 
option key is required to receive them. Private calls are 
programmed to operate in one of the following modes:

•

Disabled

•

Answer-only capability

•

List only - Unit IDs can be selected from a prepro-
grammed list only (direct entry using the keypad is 
not allowed)

•

Unlimited - Unit IDs can be selected from a list 
and also dialed directly entered using the keypad.

Both limited and DTMF keypad models can be 

programmed to recall the unit IDs from a prepro-
grammed list. However, only DTMF keypad models 
can be programmed to directly dial unit IDs.

6.5.2  PLACING AN ENHANCED PRIVATE 

CONVERSATION CALL

Recalling From List

1. Momentarily press the Private Call option key or 

select that menu parameter and the alias of the last 
called mobile is displayed. The private call mode is 
indicated by 

 in the display.

2. If required, select another mobile by pressing the 

Up/Down switch until the alias of the desired 
mobile is displayed. 

3. Press the PTT switch of the F2 key to initiate the 

call. 

(Proceed to the bulleted list which follows Item 3 in 
the next section for events that may occur next.) 

Direct Entry Using DTMF Keypad

1. Press and hold the Private Call option key until a 

tone sounds (approximately 1 second). The last ID 
called is displayed, and the private call mode is indi-
cated by 

 in the display.

2. Using the 0-9 keys, dial the ID of the mobile you are 

calling (five digits must be entered). To erase the last 
digit, press the Down key, and to cancel the call, 
press the Private Call Option key again.

* 

This feature requires 51xx operating (Flash) software 

1.9.0 or later and PCConfigure 1.20 or later.

Summary of Contents for 5100 SERIES
















































Reviews:

No comments