E.F. Johnson 242-2008-332 Page 3 Manual Download | Manualshive

Page: 3 / 51

background image

VIKING VX

800 MHz UNIVERSAL STATION

PART NO. 242-2008-332

Copyright© 1994 by E.F. Johnson

E.F. Johnson designs and manufactures two-way radio equipment to serve a wide variety of communications needs. E.F.
Johnson produces equipment for the mobile telephone and land mobile radio services which include business, industrial, gov-
ernment, public safety, and personal users.

LAND MOBILE PRODUCT WARRANTY

The manufacturer's warranty statement for this product is available from your product supplier or from the E.F. Johnson, 299
Johnson Avenue, Box 1249, Waseca, MN 56093-0514. Phone (507) 835-6222.

WARNING

DO NOT allow the antenna to touch or come in very close proximity with the eyes, face, or any exposed body parts while the
radio is transmitting.

DO NOT operate the transmitter of a mobile radio whena person outside the vehicle is within one (1) meter of the antenna.

DO NOT operate the transmitter of a stationary radio (base station, repeater or marine radio) when a person is within one (1)
meter of the antenna.

DO NOT operate the radio in explosive or flammable atmospheres. The transmitted radio energy could trigger blasting caps
or cause an explosion.

DO NOT operate the radio without the proper antenna installed.

DO NOT allow children to operate or play with this equipment.

NOTE: The above warning list is not intended to include all hazards that may be encountered when using this radio.

This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harm-
ful interference. In addition, changes or modification to this equipment not expressly approved by E.F. Johnson could void the
user's authority to operate this equipment (FCC rules, 47CFR Part 15.19).

SAFETY INFORMATION

Proper operation of this radio will result in user exposure below the Occupational Safety and Health Act and Federal Commu-
nication Commission limits.

The information in this document is subject to change without notice.

E.F. Johnson will not be liable for any misunderstanding due to misinformation or errors found in this document.

LTR, Multi-Net, LTR-Net, Viking Head/EFJohnson Logo, Call Guard and SUMMIT are registered trademarks of E.F. Johnson
All other company and/or product names used in this manual are trademarks and/or registered trademarks of their respective
manufacturer.

«
1
2
3
4
5
...
»

Summary of Contents for 242-2008-332




















































Reviews:

No comments

Related manuals for 242-2008-332

Brand: Garod Radio Pages: 29

Brand: Samsung Pages: 10

Brand: Yamaha Pages: 10

Brand: Tech3E Pages: 8

Brand: Alinco Pages: 16

Brand: Alpine Pages: 56

Brand: Xtrend Pages: 93

Brand: Sansui Pages: 50

Brand: Teac Pages: 40

Brand: iSimple Pages: 12

MultiView AK1200

Brand: Magenta Pages: 28

Brand: ZGEMMA Pages: 31

Brand: Nakamichi Pages: 56

Brand: Aiwa Pages: 14

Brand: Jensen Pages: 27

EWFS Piccolo PL

Brand: WAREMA Pages: 6

Brand: Dual Pages: 20

Brand: Marmitek Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands