Draft 02 - Sep 1 2015
3-4
Viking Mobile Radio Operating Manual
General Operation
The current User password can be changed if the “Change User Password” function is
programmed. Selecting this function displays prompts for entering and confirming a new
password.
Note
Standard Control only allows up to a ten digit password while Lightning Control Head
allows up to a twelve digit password.
3.1.3.1
Programming Passwords
Passwords are set by programming. The applicable radio must be connected to the
computer and powered up to program the password.
Note
Any password changes made to the radio will be immediately applicable when Password
Management is exited.
3.1.3.2
Lost Passwords
If a password is lost, contact customer service.
3.1.3.3
Changing Passwords
An assigned user password can be changed by the user if the Change User Password
function is programmed. Selecting this function displays prompts for entering and
confirming a new password.
3.1.3.4
Password Entry Procedure
When a password is requested, rotate and press the Select switch. A single beep sounds
when the switch is pressed (if that option is selected)
3.1.3.5
Zone Password
A zone password can be programmed with the Viking mobile radio. It prevents
unauthorized reprogramming of zones by keypad programming.
Note
The programming and usage of this password has not changed. It is independent from the
preceding passwords, and is set by programming.
