E.F. Johnson Company 51 Series, Preliminary Operation Manual

Page: 26 / 72

GENERAL OPERATION
26
is in the current scan list if “
SL
” (Scan List) is indicated in the upper part
of the display.
Nuisance Channel Delete
With standard scanning, channels can be temporarily deleted from
the scan list, for example, if messages on a channel become annoying.
This feature is not available with radio wide scanning. Proceed as follows:
NOTE: The selected channel and conventional priority channels cannot
be deleted from the scan list.
1. While receiving a message on the channel to be deleted, press and hold
the Scan option switch until the alert tone sounds (about 1 second).
2. The channel is then deleted and scanning of the remaining channels in
the scan list resumes.
3. Deleted channels are added back into the scan list if any of the
following events occur:
•
Scanning is turned off and then on again using the Scan switch.
•
Transceiver power is turned off and then on again.
•
The scan list is reselected by pressing the number key corresponding
to the list number (conventional) or by selecting another channel
(SMARTNET/SmartZone).
•
Another channel is selected by the top panel channel switch.
Programming a Scan List
When full keypad (17-key) models, conventional and SMARTNET/
SmartZone standard scan lists are user programmable if the Scan Edit
option switch is programmed and user programming of the list is allowed.
Scan list programming is not available with limited keypad (5-key)
models. Proceed as follows to program a scan list: