manualshive.com logo in svg

E-data DSL-2120 Series, User Manual

Share
Download
E-data DSL-2120 Series User Manual Download Page 6

Proprietary & Confidential 

Page 

6 of 86 

Revision: V1.0 

 

Apr. 23, 2008

 

Chapter 1 - Getting to Know DSL-2120/2120W 

Your DSL-2120/2120W integrates high-speed 10/100Mbps auto-negotiating LAN 

interface(s), USB port and a high-speed ADSL port. The DSL-2120/2120W is perfect for 

making LAN-to-LAN connections to remote networks and for high-speed Internet browsing. 

The DSL-2120/2120W provides lightning-fast Internet access to multiple users by combining 

Direct Subscriber Line (DSL) and Network Address Translation (NAT). 

The Web-based Graphical User Interface (GUI) allows easy management and is not 

dependent on any single operating system to use. 

1.1 Features of the DSL-2120/2120W 

¾

 

High Speed Internet Access

 

The DSL-2120/2120W ADSL 2/2+ router support downstream transmission rates of up to 

24Mbps and upstream transmission rates of 1Mbps. 

¾

 

PPPoE Support (RFC2516)

 

Point-to-Point Protocol over Ethernet (PPPoE) emulates a dial-up connection. It allows 

your Internet Service Provider (ISP) to use its existing network configuration with newer 

broadband technologies such as ADSL. The PPPoE driver on the DSL-2120/2120W is 

transparent to the computers on the LAN. Computers see only Ethernet and are not aware of 

PPPoE; you don’t have to manage PPPoE clients on individual computers. 

¾

 

Network Address Translation (NAT)

 

Network Address Translation (NAT) allows the conversion of an Internet protocol (IP) 

address used within one network, such as a private IP address used in a LAN, to a different IP 

address known within another network, such as a public IP address used on the Internet. 

¾

 

Universal Plug and Play (UPnP) 

Using the standard TCP/IP protocol, the DSL-2120/2120W and other UPnP enabled 

devices can dynamically join a network, obtain an IP address and convey its capabilities to 

other devices on the network. 

¾

 

10/100M Auto-negotiation Ethernet/Fast Ethernet Interface

 

Auto-negotiation allows the DSL-2120/2120W to detect incoming transmissions’ speeds 

and make necessary adjustments without manual intervention. It also allows data transfer 

rates of either 10 Mbps or 100 Mbps, in either half-duplex or full-duplex mode, depending on 

your Ethernet network. 

¾

 

Dynamic DNS Support

 

With Dynamic DNS support, you can have a static hostname alias for a dynamic IP 

address, allowing the host to be more easily accessed from other locations on the Internet. 

Summary of Contents for DSL-2120 Series























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands